Aei Dk 9830 Change Password ((full)) < 99% Hot >

The Master Code is used only to enter programming mode; it cannot be used to operate the door. The factory default is Enter the existing Master Code twice: [Master Code] [Master Code]

Press * + [Current Master Code] + # 1.2.1. Command: Press 5 + 01 1.2.1. User ID: Enter a 3-digit User ID Number (001-999) 1.2.1. User Code: Enter the new 4-8 digit code 1.2.1. Finish: Press # 1.2.1. aei dk 9830 change password

Disconnect the jumper from its default position and place it across the DAP pins. The Master Code is used only to enter

User codes are the passwords used by individuals to unlock the door. The AEI DK-9830 supports up to 250 users. You can find these programming options detailed in the AEI DK-9830 Operations Manual . Enter Programming Mode: * + [Master Code] + # . Press 5 , then 00 . Enter the new User Code (4-8 digits) and press # . For Multi-User Codes (Assigning to specific slots): Enter Programming Mode: * + [Master Code] + # . Enter the User ID (a 3-digit number from 001 to 250 ). Enter the new User Code and press # . Emergency Reset: If You Forgot the Master Code User ID: Enter a 3-digit User ID Number (001-999) 1

To change anything, you first have to prove you have the authority. The DK-9830 is a compact system that relies on a Master Code—factory-set to unless it was changed during installation.