: Wear protective eyewear and gloves during structural mounting.
Verify the ceiling structure can support the weight of the motor rail. Required Tools Electric drill and masonry bits Socket wrench set Screwdrivers (Phillips and flathead) Measuring tape and spirit level Wire strippers 3. Assembling the Guide Rail : Wear protective eyewear and gloves during structural
| Problem | Likely cause | Action | |---------|--------------|--------| | No power | Outlet dead, cord loose | Check outlet, reseat cord | | Display error “E01” | Sensor fault | Reboot, if persists → service | | Inconsistent operation | Interference | Move away from large motors/transformers | | Overheating | Blocked vents | Clean vents, reduce runtime | | Buttons unresponsive | Static or firmware glitch | Power cycle 30 sec | Assembling the Guide Rail | Problem | Likely