Hw416b Pir Sensor Datasheet Better __exclusive__ Jun 2026

The HW416B’s combination of low cost, adjustable parameters, and TTL output makes it suitable for a wide range of projects:

While most datasheets give you a wall of text, here are the numbers that actually matter for your build: Wide range from 4.5V4.5 cap V to 12V12 cap V (though is standard). Detection Range: Up to 7 meters in a 120∘120 raised to the composed with power cone. Output Signal: A simple digital "High" at 3.3V3.3 cap V logic level when motion is detected. Current Draw: Extremely low idle current (around ), making it perfect for battery-powered setups. 2. The "Better" Adjustments: Potentiometers and Jumpers hw416b pir sensor datasheet better

| Feature | HW416B | HC‑SR501 | |---------|--------|----------| | | Yes (potentiometer) | Yes (potentiometer) | | Adjustable sensitivity | Yes (potentiometer) | Yes (potentiometer) | | 3.3 V operation | Via configuration pins (verified) | Requires regulator bypass | | Trigger mode jumper | Yes (repeat/non‑repeat) | Yes | | EMC certification | Listed in product specs | Not typically claimed | | Price | Similar (~US$3–5) | Slightly cheaper (~US$2–4) | Current Draw: Extremely low idle current (around ),

These sensors often come from the factory with the time potentiometer set to the center position , which corresponds to a delay of approximately three minutes . If you're testing the sensor and it stays HIGH for a long time without motion, you've discovered this default setting. If you're testing the sensor and it stays

The output signal of the HW416B is a digital signal that goes high (1) when a person is detected and low (0) when no person is detected. The output signal can be connected directly to a microcontroller or other digital circuit.