Vixen160911kristenscottilivetobebadx Top !!exclusive!! «2026 Release»
Once I have these details, I can draft a high-quality post tailored to your needs.
Click
to download the Demo version ( 2.xx std. version only demo ).
Click to download the Pdf instructions.
Full version for 99.- € EURO :
Pro version with
0.1 degree resolution 149.- € EURO :
Version that includes the Cam measuring machine controls and schematics
for it etc.
costs 199.- € EURO :
Pro version that includes the Cam measuring machine controls and
schematics
for it etc.
costs 249.- € EURO :
On
recieving your
order, the Software will be compiled with your Company name on the
start Page
and the
download link will be mailed to the email address you have
used to order.
There are 12 months of free updates included.
You can also mail us for an upgrade price if your purchase is older than 12 months
or you want to expand your existing version to Pro :
Short
overview.
Start
Page: The
program is able to work in both mm and inches.
iIt uses
Splines to generate the Valve lift curve, with this approach it is
fairly
easy to
copy any
measured Cam lift curve and then modify it or make new Cam design from
scratch. Splines
aren’t as
limited as the more common Polynomial curve approach and with Splines
it’s easy
to
design an asymmetric lift profile. With the adjustable 2 stage
smoothing
function it’s also easy to get
low Jerk values without compromising the lift
curve.
Design Page with comparison cam shown in grey:
Zoomed in on the top of the accelleration curve, shows the difference
in 1 and 0.1 degree resolution:
Design Report Page:
Flat tappet with design Cam shown inside the old Cam with larger
basecircle.
Roller Cam shape shown :
Duration etc. Calc for up to 4 Cams: Change the centerline and calculate
directly the changes in opening, closing degrees, lift
at TDC and eg. 10 deg. before/after TDC etc.
Compare Curves for up to 4 Cams at the same time:
Comparison Cam nr. 1 ( 2 and 3 ): This Page takes its input from the lift
data in
mm/inch with 0.1, 1 ,2, 4 or 5 degree steps data in the left Window. For Hand measured Cams there is the
option
to smooth the generated lift-velocity-accelleration and jerk data.
Piston movement Page: Visualize Valve behavior during the
overlap phase.
Cam report Page: Generates Cam report
and/or a Cam Card with specs.
Static Valve Spring Force Calculating Page:
Fast Fourier Tranformation analysis:
Cam
explorer
Page, only active in the 199.- and 249.- Euro version: With Interface to the Cam measuring machine
electronics .
A complete reference to parts needed
from eg. Ebay is supplied, as well as full schematics
to the wiring and firmware for the Arduino Uno board that controls the
Steppermotor/Driver and the
Mitutoyo indicator.
Excluding the Mitutoyo indicator and its SPC cable, the price of parts
from Ebay adds up
to just under 400 $ (December 2014)..
July 2020, Linear encoder indicator option included.
An example of a Cam measuring Machine made from the referenced parts (
+ an aluminium
profile cut and milled, not supplied ) :
Click to download the Pdf instructions. 
