Blue Point Mt596a Multimeter Manual [work]

If the low battery icon appears, remove the test leads, remove the back casing screws, and replace the 9V battery.

: Capable of checking components like solenoids, ABS sensors, oxygen sensors, intake air temperatures, and fuel pressure. Robust Build blue point mt596a multimeter manual

If the meter fails to measure current (Amps) but voltage works perfectly, the internal safety fuses are likely blown. If the low battery icon appears, remove the

Power down the circuit and disconnect any components to avoid backfeeding. Insert the black lead into and the red lead into V / Ωcap omega . Set the dial to the Ωcap omega position. Touch the probes across the resistor, sensor, or wire. Power down the circuit and disconnect any components

Connect the meter in series : Black probe to the loose battery cable, Red probe to the negative battery post.

Plug the black lead into the COM jack and the red lead into the V Ωcap omega jack.