Jungheinrich Eje 120 | Error Code 4372

If your EJE 120 was purchased from a dealer (especially from older stock), there is a high probability that a solution is already available from the manufacturer. According to industry sources, Jungheinrich has been aware of the problem and has undertaken campaigns to rectify it. As one post from a dealer representative noted, if you buy a brand new, in-date unit, the bug should already be fixed. However, if you have a unit from older stock, you will need to have an official Jungheinrich technician perform the firmware update.

The most common technical cause is a "neutral zone" window that is too tight for the sensor to reliably detect. This often causes the truck to cut out hydraulics intermittently. Firmware Updates: jungheinrich eje 120 error code 4372

The Jungheinrich EJE 120 Go to product viewer dialog for this item. If your EJE 120 was purchased from a

Not usually. The first and most likely solution is a firmware update. Replacing the entire tiller head is a last resort after other diagnostics have failed, or if physical damage or severe corrosion is found. However, if you have a unit from older

Locate a near you for the software update. Walk through other common EJE 120 fault codes . Discussion: Error 4372 - Forums - Forklift Action

Use a specialized electrical contact cleaner on the sensor plugs and wiring harnesses. Step 3: Mechanical Check of the Neutral Return Ensure the controls physically return to true center.

If you operate the pallet jack in a humid or dusty environment, dust accumulation can interfere with analog sensors. 3. Update Tiller Head Firmware