Once you have paired your SPB112 with a device, it will remember it. Every time you turn on the speaker, it will automatically attempt to reconnect to the last device it was paired with. For this to work, the Bluetooth on your paired device must be turned on and be within range.
While this consolidated guide covers all essential functions, you may wish to consult the original user manual directly. The most complete and accurate manual is available for the model.
Turn on the speaker; it defaults to pairing availability automatically.
Before diving into setup, it helps to understand the baseline capabilities of your Technika SPB112 Speaker . Bluetooth wireless audio pairing
| Problem | Likely Cause | Solution | |---------|--------------|----------| | | Battery is completely depleted | Charge the speaker for at least 2 hours using the included USB cable and a standard USB power source. | | LED shows blue+red flashing but no connection | Speaker is in pairing mode but no device is connecting | Ensure Bluetooth is enabled on your source device and that you have selected “SPB112 IGNIS” . Delete the speaker from your device’s Bluetooth list and try pairing again. | | Audio cuts out or is distorted | Distance too great (beyond 10 metres) or obstacles (walls, metal objects) | Move the source device closer to the speaker. Remove any physical obstructions. | | No sound in AUX‑in mode | Cable not fully inserted; source volume very low | Push the 3.5 mm plug firmly into both devices. Raise the volume on your source device. | | Speaker connects but no sound | Source device may be sending audio to a different output | On your source device, ensure the Bluetooth output is selected. On a Mac/PC, check the sound output settings. | | Cannot pair with a second device | Speaker is still connected to the first device | Disconnect Bluetooth on the first device (or turn it off), then put the speaker into pairing mode again. | | Microphone not working for calls | Not selected as default communication device (on computers) | On a PC/Mac, go to Sound Settings and set the Bluetooth speaker as both Output and Input device. |
Understanding the physical layout of your Technika SPB112 makes daily operation seamless. The device features a minimalist design with buttons located on the side panel and indicator lights on the front grille. Side Control Panel
: It uses Bluetooth version 2.1 + EDR or higher.
